A.R.M.S.® #22M68™ Throw Lever® Ring

Designed exclusively for the Aimpoint® Comp. ML 1, ML 2 and ML 3 sights.
Low std. height allows perfect Red Dot co-witnessing on M16/M4 with A.R.M.S.® #38™ Sleeves and S.I.R.® without a spacer. A full spacer is required if mounting directly on the flat top rail.
Item: #22M68™
MSRP $99.00

A.R.M.S.® #22TX30™ Throw Lever® Ring

Designed exclusively for the Trijicon® Tri-Power® Sight, attaches to the flat top receivers with the patented A.R.M.S. Throw Lever®.
Item: #22TX30™
MSRP $99.00

A.R.M.S.® #22™ TRC Tactical Ring Cap

For use on all A.R.M.S.® #21™, #22™, and #35™ Ring saddles. Shown with #22™TRR (Front ring) and #22™TRS (Rear ring) attached.
This unique ring cap was designed to expand the standard use of a cap normally only holding a scope in position, to that of allowing modular enhancements on various conventional optics by simply removing the standard cap and installing the tactical cap using the same socket head screws.
Item: #22™ TRC
MSRP $35.00

A.R.M.S.® #22™ TRR Tactical Ring Rail

The #22™ Tactical Ring Rail allows mounting of devices to the top of your scope ring.
The #22™TRR provides a very useful additional mounting base to scoped rifles on which to mount equipment such as lights, lasers or auxiliary sighting devices.
*Requires the use of the #22™ Tactical Ring Cap*
*Compatible with #22M68™ Spacers for additional height when using optics with tall elevation adjustment knobs*
Item: #22™ TRR
MSRP $20.00

A.R.M.S.® #21™ Rings

The #21™ Rings are all steel with a Mil-spec phosphate finish for ulimate surface protection.
Phosphate finish screws and wrench
included. Available in Low height (Sold as a Pair).
Item: 21
MSRP $75.00

A.R.M.S. #22-34™mm Rings

Rings now available for the 34mm scopes.
Spacers (shown) also available to give you 1/2" additional height to the rings.(sold separately in spacer section).
Item: 22-34
MSRP $130.00

A.R.M.S.® #22™ Throw Lever® Rings

All Steel 30mm Ring, secured with A.R.M.S.® dovetail system to an extruded aluminum platform. Built in no mar Patented Buffer Pads.

High rings: 1.450" (Measured from the center of the optic to the base)
Item: 22™H
MSRP $109.00
Medium rings: Height: 1.150" (Measured from the center of the optic to the base)
Item: 22™M
MSRP $109.00
Low rings: Height: .925" (Measured from the center of the optic to the base)
Item: 22™L
MSRP $109.00

A.R.M.S.® #35™ 30mm Rings
Price is per pair

rings that attach to A.R.M.S. rail foundations that have stainless steel helicoil threaded holes imbedded into the center channel of the rail between the Mil-Spec dovetail rails, allowing perfect solid alignment.

High rings: Height: 1.50" (Measured from the center of the optic to the top of the rail)
Item: 35™H
MSRP $67.00
Medium rings: Height: 1.25" (Measured from the center of the optic to the top of the rail)
Item: 35M
MSRP $67.00
Ultra Low rings: Height: .900" (Measured from the center of the optic to the top of the rail)
Item: 35™L
MSRP $60.50

A.R.M.S.® #37™ Ring Inserts

  The #37™ Ring inserts are all steel with a Mil-spec phosphate finish, for ultimate surface protection.
Converts all A.R.M.S.® and other 30mm rings to 1". (Sold as a pair)
Item: 37™
MSRP $29.00

A.R.M.S.® #23™ Quick Detach Throw Lever Pistol Grip

The fastest attaching and detaching grip on the market by incorporation of the Throw Lever system. Engineered to be as robust and sturdy as the M16 lower receiver pistol grip. Optimum handling angle for a natural grip in a stabilized forward position. The #23™ will fit the A.R.M.S.® S.I.R.® System as well as any other hand guard incorporating Mil-Std. 1913 Rails.
Item: #23™
MSRP $73.00